Cpuc, Price Per Unit And Currency Table; Cpuc Parameters - Motorola AT Commands G24-L Developer's Manual

Call Control

+CPUC, Price per Unit and Currency Table

This command sets the parameters of the Advice of Charge-related price per unit and currency
table found in the SIM file, EFPUCT. PUCT information is used to convert the home units (used
in +CAOC, +CACM and +CAMM) into currency units.
Command
Type
Set
Read
Test
The following table shows the +CPUC parameters.
<Parameter>
<currency>
<ppu>
<passwd>
Example
AT+CPUC=?
OK
AT+CPUC="GBP","0.125","2222"
OK
AT+CPUC?
+CPUC: "GBP","0.125"
OK
3-48
Syntax Response/Action
+CPUC=<currency>, OK
<ppu>,<passwd>
+CME ERROR: <err>
+CPUC? +CPUC:
<currency>,<ppu>
+CME ERROR: <err>
+CPUC=? OK
Table 3-24: +CPUC Parameters
Currency code character set (3 characters) defined by +CSCS command.
"+CSCS, Select Terminal Character Set", page
If the string begins with an alphanumeric character, it may be entered with or without
quotation marks, for example, "GBP", "DEM".
Price per unit
A dot is used as a decimal separator (precision of 1/1000; 15 digit maximum), for
example,"2.667".
[See notes below]
SIM PIN2 password
Maximum string length is 8 characters. If this value is exceeded, the command
terminates in an error. If PIN2 is incorrect, "+CME ERROR: incorrect password" is
displayed.
G24-L AT Commands Reference Manual
Remarks
The Set command sets the price per
unit and the currency table. SIM PIN2
is required. The new value is retained
after a power cycle.
The Read command displays the
current price per unit and currency
table.
The Test command indicates whether
the +CPUC command is functioning.
Description
3-4.)
(Refer to
April 15, 2008