Table of Contents
Advertisement
DHCP Server Tab
The DHCP Server tab enables Dynamic Host Configuration
Protocol (DHCP) server functionality on the LAN, allowing the
router to dynamically assign lease IP addresses to clients that
connect to it from the local network.
Field or Button
Description
Enable DHCP
If selected, the DHCP server on the gateway
Server
assigns IP addresses to the computers and
other hosts on your network if they have
DHCP enabled. By default, the gateway
server is enabled. If there is another DHCP
server running on your network (on another
router), you must disable one of the DHCP
servers.
DHCP Server IP
Enter the default port forwarding LAN Client
Address
IP Address.
DHCP Starting
Sets the first IP address assigned by the
IP Address
DHCP server, in dotted-decimal format. It
must be greater than the IP address value of
the gateway. For example, if the IP address of
the gateway is 192.168.15.1 (default), the
starting IP address must be 192.168.15.2 (or
higher).
DHCP Ending IP
Sets the final IP address assigned by the
Address
DHCP server. If the DHCP server runs out of
DHCP addresses, users cannot access
network resources. If this happens, increase
the Ending IP or reduce the Lease Time.
40
Advanced Configuration
Hide quick links:
Advertisement
Table of Contents
