Applying The Grease - Canon iPF5000 series Service Manual

Chapter 4

4.4 Applying the Grease

4.4.1 Applying the Grease

iPF5000 / iPF5100
Some parts require application of grease when replaced. Apply the grease(special tool) listed below.
Smear the grease lightly and evenly with a flat brush or the like.
For the printer disassembly/reassembly method, refer to "DISASSEMBLY/REASSEMBLY" and "parts catalog".
Do not apply the grease to locations in which not designated grease may cause poor print quality. Take particular care that grease do not get onto the wiper, cap,
and linear scale.
No.
1
2
3
4
5
6
7
8
9
10
11
4-64
Location
Joint base
Shaft cleaner/oil pad
Eject roller bearing
Eject roller center bearing
Spur cam
Pick-up cam
Separation cam gear
Release lever
Return lever arm
Paper feed inner guide
Pinch roller unit release shaft
Grease type Quantity
Molykote PG-641 Approx.6/12mg
EU-1 soaks enough.
Molykote PG-641 Approx.12mg
Molykote PG-641 Approx.12mg
Molykote PG-641 Approx.20mg
Molykote PG-641 Approx.12mg
Molykote PG-641 Approx.20mg
Molykote PG-641 Approx.12mg
Molykote PG-641 Approx.12mg
Molykote PG-641 Approx.12mg
Molykote PG-641 Approx.12mg
0012-6421