Fixing System; 1Applying Grease After Replacing The Fixing Roller; Applying Grease After Replacing The Fixing Roller; 2Adjusting The Nip Width - Canon iR6570 Series Portable Manual

Chapter 2

2.6 Fixing System

2.6.1 Applying
After Replacing
Fixing Roller
iR5570 / iR6570
- Apply about 20 mg of grease (Molykote HP-300;
CK-8012) on the inner [1] and outer [2] surfaces of
the bushing until there is a white coating covering
the entire sources. Failure to apply grease will cause
abnormal (squeaking) sound.
F-2-52
- There will likely be adhesion of grease on the ends
[1] of the fixing roller when the bushing is fitted to
the roller. Be sure to remove the adhesion.
2-36
Grease
the
0009-4869
[2]
[1]
F-2-53
2.6.2 Adjusting the Nip
Width
iR5570 / iR6570
There is no need for adjustment of the nip widh.
2.6.3
Adjusting
Position of the Fixing
Web Solenoid (SL9)
iR5570 / iR6570
a. If the fixing web is new,
Turn the screw [2] to adjust the position of the
solenoid so that the shift distance of the drive lever
[1] is 8.6 mm.
[1]
0009-4870
the
0007-7185