Makita HR2430 Technical Information page 6

R
epair
Remove tool holder with arbor press as illustrated in Fig.4.
Tool holder
Fig.4
<3> Removing impact bolt
1. Push impact bolt ahead with screwdriver
as illustrated in Fig.5.
Impact bolt
Fig.5
2. Take off steel ball 5.6 by striking stool holder
Steel ball 5.6
with plastic hammer slightly as illustrated in
Fig.5A
Fig.5A
3. Take off O ring 11 with a bodkin as illustrated in
Fig.5B.
O ring 11
Fig.5B
4. Remove impact bolt by pushing it with
screwdriver as illustrated in Fig.5C.
Fig.5C