Main Board Scetion; Lithium Ion Battery, Main Board - Sony NW-S603 Service Manual

3-6. MAIN BOARD SECTION
9 connector
(CN801)
8 Peel copper leaf (tuner)
from the MAIN board.
adhesive sheet
(SUB PWB)
5 SUB board
Note: Because adhesive sheet (SUB PWB)
is attached, remove the SUB board,
not giving an excessive force.

3-7. LITHIUM ION BATTERY, MAIN BOARD

Note: Adhesive sheet (battery) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (battery) is removed.
0 MAIN board
9 holder rear sheet (A)
knob (JOG)
4 connector
6 two screws
(CN108)
(B1.4)
2 adhesive sheet (battery)
1
8 main PWB sheet
NW-S603/S605/S703F/S705F/S706F
1 Set the knob (JOG) to the position of FOLDER.
knob (JOG)
7 OLED sub assy flexible board
(CN401)
3 connector (CN601)
Note: Be sure to remove the connector of a battery
before removing the flexible board of OLED
sub assy. OLED sub assy may be damaged
if the flexible board of OLED sub assy is
removed with the connector of a battery not
removed.
q; MAIN board section
4 lithium ion battery
6 holder (connector)
5 two claws
7 adhesive sheet (connector)
Note: Adhesive sheet (connector) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (connector) is removed.
Ver. 1.1
2 sheet (wire)
3 spacer (line in)
9