Radio; Listening To The Radio; Advanced Radio Operation - Pioneer AVIC-D1 Operation Manual

Radio

Listening to the radio

(1) (2)
(5)
(7) (6)
These are the basic steps necessary to operate
the radio.
➲ More advanced radio operation ➞ Page 76
(1) Source icon
Shows which source has been selected.
(2) Band indicator
Shows which band the radio is tuned to AM or
FM.
(3) Preset number indicator
Shows what preset has been selected.
(4) Frequency indicator
Shows to which frequency the tuner is tuned.
(5) Preset list display
Shows the preset list.
(6) LOCAL indicator
Shows when local seek tuning is on.
(7) STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
76
(3) (4)
1
Touch the source icon and then touch
"RADIO" to select the radio.
2
Touch "BAND" to select a band.
Touch "BAND" repeatedly until the desired
band is displayed, FM1, FM2, FM3 for FM or
AM.
3
To perform manual tuning, touch
briefly.
The frequencies move up or down step by
step.
You can also perform manual tuning by mov-
ing the joystick left or right.
4
To perform seek tuning, keep touching
or for about one second and
release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception
is found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching
skip broadcasting stations. Seek tuning starts
as soon as you release the keys.
You can also perform seek tuning by holding
the joystick left or right.

Advanced radio operation

(1)
(1) Function display
Shows the function names.
➲ How to display the FUNCTION menu ➞
Page 71
or
or you can