Motorola Cellular Gateway Nc800 Configuration; Computer System Requirements For Motorola Cellular Gateway Nc800 Configuration; Logging In - Motorola NC800 User Manual

Cellular gateway
Table of Contents

Advertisement

5. Motorola Cellular Gateway NC800 Configuration

Motorola Cellular Gateway NC800 configuration is done via a Web-based configuration utility. This means that
you can change the Motorola Cellular Gateway NC800's settings from any PC with a web browser that supports
HTML version 4.0. The Motorola Cellular Gateway NC800 has been optimized for Internet Explorer (version 6.0
or above) or Netscape Navigator (version 7.0 or above). You only need to configure the Motorola Cellular
Gateway NC800 once.
Computer System Requirements for Motorola Cellular Gateway NC800
Configuration
In order to configure the Motorola Cellular Gateway NC800, you need:
A Web-enabled PC.
Any of the previously mentioned Web Browsers, with JavaScript enabled.
Either:
A wireless adapter compatible with the 802.11b or 802.11g standard and enabled as described
o
previously.
A LAN connection via the Ethernet adapter from the Gateway to the PC. It is preferable to use a
o
wired connection to LAN 1.

Logging In

Open a browser to the default address of the Motorola Cellular Gateway
NC800:
http://192.168.1.1
Motorola Cellular Gateway NC800 then use the new IP address instead of
the default address.
When prompted for a user name and password type
admin in both the User Name and Password fields.
If you have already changed the HTTP Username
and Password, then use the new values.
The initial page of the Motorola Cellular Gateway
NC800 Configuration will open showing the Basic
Gateway Settings page.
2
By asking for a Username and Password the gateway is preventing unauthorized persons from changing the
gateway settings. It is important that you remember the gateway's username and password. If you forget either
the Username or Password you will have to restore the gateway's default settings by pressing the Reset button
for about 10 seconds, login using the default username and password and re-setup all the gateway's settings.
Motorola Cellular Gateway NC800 User Guide Version 2.0
. If you have already changed the IP address of the
2
Page 26 of 110

Advertisement

Table of Contents
loading

Table of Contents