Switching The Hdmi Audio Setting; Resetting The Hdmi Connection; About Hdmi - Pioneer DCS-353 Operating Instructions Manual

Dvd/cd receiver speaker system
Hide thumbs Also See for DCS-353:
Table of Contents

Advertisement

09
Other connections
HDMI
connector
ANTENNA
FM
UNBAL 75 Ω
AM LOOP
HDMI OUT
HDMI OUT
XV-DV353/360
• The arrow on the cable connector body
should be face up for correct alignment
with the connector on the player.
You can also adjust the HDMI settings for
resolution and color. For more on these
settings see Video Output settings on page 26.

Switching the HDMI audio setting

To listen to audio from the HDMI interconnect,
make sure you've specified the HDMI audio
output setting.
1
Switch the system into standby.
2
Press SETUP and use
HDMI OUT then press ENTER .
3
Use
to choose the setting you want
then press ENTER .
• AUDIO ON – Audio signals are output
through the HDMI interconnect
• AUDIO OFF – Switches off HDMI audio
34
En
HDMI-compatible display
LINE 2
R
L
FRONT
L
LINE 1
LINE 1
AV CONNECTOR
R
R
L
SURROUND
VIDEO OUT
VIDEO OUT
AUDIO IN
SPEAKERS
to choose

Resetting the HDMI connection

If you get an error message (the display shows
HDMI ERR) or if the screen goes blank (for
example, after changing the resolution), check
the troubleshooting guide on page 42. If this
doesn't solve the problem, follow the steps
below to reset the HDMI connection.
1
Switch the system into standby.
CENTER
2
Press SETUP and use
SUB
WOOFER
HDMI INI then press ENTER .
The system will restart and the HDMI settings
are automatically reset to the factory defaults.
See Video Output settings on page 26 for more
on these settings.

About HDMI

HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI
was developed to provide the technologies of
High Bandwidth Digital Content Protection
(HDCP) as well as Digital Visual Interface (DVI)
in one specification. HDCP is used to protect
digital content transmitted and received by DVI-
compliant displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multichannel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and AV
devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
to choose

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents