Listening To Other Sources; Setting The Sleep Timer; Dimming The Display - Pioneer DCS-353 Operating Instructions Manual

Getting started

Listening to other sources

You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
audio components on page 31 for more on this.
• To connect a USB device to the USB
terminal, see USB playback on page 22.
STANDBY
/ON DVD/CD
USB
1 Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Press LINE to select the source.
U.K. model only – Each press switches
between LINE1 and LINE2.
3 If necessary, start playback of the source.

Setting the sleep timer

The sleep timer switches off the system after
about an hour so you can fall asleep without
1
worrying about it.
• Press SLEEP repeatedly to select an option
then press ENTER .
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
S L P - - - - -
Note
1 The display dims when the sleep timer is set.
TUNER
(FM/AM)
OPEN/
CLOSE
LINE
AUDIO

Dimming the display

You can dim the display if you find it too bright.
1 Press SETUP and use
DIMMER then press ENTER .
This is shown in the front panel display.
2 Use to select LIGHT or DARK then
press ENTER .
02
to choose
13
En