Switching The Sound Muting/ Attenuation; Changing The Wide Screen Mode; Setting The Audio Output - Pioneer AVIC F500BT Operation Manual

Chapter
13 Customizing preferences
Each touch of [AV Input] changes the settings
as follows:
! Off — No video component is connected
! iPod — iPod connected with the USB Inter-
face cable for iPod (CD-IU200VM)
! Video — External video component
p Use the CD-RM10 (sold separately) to con-
nect the external video component.
Switching the sound muting/
attenuation
You can select the muting method when the
navigation guidance is output.
p When you use a cellular phone connected
with Bluetooth technology (dialing, talking,
incoming call), the AV source volume is al-
ways muted independently of this setting.
p When the voice recognition mode is acti-
vated, the AV source volume is always
muted independently of this setting.
p When ND-G500 is connected with this sys-
tem, the sound output from the connected
car stereo is always muted when the navi-
gation guidance outputs.
% Touch [MUTE Input/GUIDE] on the "AV
Settings" menu.
= For details, refer to Displaying the "AV Set-
tings" menu on the previous page.
Each touch of [MUTE Input/GUIDE] changes
the settings as follows:
! MUTE — Muting
! ATT — Attenuation
! Normal — Volume does not change
p Operation returns to normal when the cor-
respond action is ended.
p When "SD" or "USB" selected as the AV
source, the AV sounds, the navigation gui-
dance and beep sounds are mixed and the
volume can be adjusted simultaneously.
96
En

Changing the wide screen mode

% Touch [Wide Mode] on the "AV Set-
tings" menu.
= For details, refer to Displaying the "AV Set-
tings" menu on the previous page.
Each touch of [Wide Mode] changes the set-
tings as follows:
Full — Normal
Full (full)
A 4:3 picture is enlarged in the horizontal di-
rection only, enabling you to enjoy a 4:3 TV pic-
ture (normal picture) without any omissions.
Normal (normal)
A 4:3 picture is displayed normally, giving you
no sense of disparity since its proportions are
the same as that of the normal picture.
p Different settings can be memorized for
each video source.
p The setting is automatically applied with
the following grouping.
! SD, USB, iPod
! AV
p When video is viewed in a wide screen
mode that does not match its original as-
pect ratio, it may appear differently.
p Remember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author's
rights protected by the Copyright Law.
p The navigation map and the rear view cam-
era picture is always viewed at Full.

Setting the audio output

You can change the audio output setting de-
pending on your usage.
Touch [Audio Out Selection] on the "AV
1
Settings" menu.
= For details, refer to Displaying the "AV Set-
tings" menu on the previous page.
2 Touch [Audio Out Selection].
Each touch of [Audio Out Selection] changes
the settings as follows:
! Both — Outputs the sound from both the
built-in speaker and audio output terminal.