Table of Contents
Advertisement
Chapter
02
Basic operation
How to use the map
Most of the information provided by your navigation system can be seen on the map. You need to be-
come familiar with how the information appears on the map.
How to read the map screen
This example shows an example of a 2D map screen.
p Information with the mark (*) appears only
when the route is set.
p Depending on the conditions and settings,
some items may not be displayed.
1 Next direction of travel*
When you approach a guidance point, this ap-
pears green. Touching this item enables you
to hear the previous guidance again.
p For more information about the direc-
tion symbol, refer to Supplemental infor-
mation about directions on page 115.
2 Distance to the guidance point*
Shows the distance to the next guidance
point.
3 Name of the street to be used (or next gui-
dance point)*
4 Current time
18
En
5 Compass
The red arrow indicates north.
6 Map mode selector
= For details, refer to Switching the map
between 2D and 3D on page 20.
7 Shortcut to the "Map Confirmation
Screen"
Touching this shortcut enables the screen to
switch to the "Map Confirmation Screen" di-
rectly with the current position or the cursor
position centered.
= For details, refer to What you can do with
the "Map Confirmation Screen" on page
36.
8 Stop key for the dummy run
Advertisement
Table of Contents
