NETGEAR Nighthawk X4S Quick Start Manual page 7

3. Connect your modem:
Internet
Cable or
DSL
a. Plug in, then turn on your modem.
b. If you removed the batteries, replace them.
c. With the Ethernet cable that came with the router, connect
your modem to the yellow Internet port on your router.
4. Add power to the router:
Internet
a. Connect the power adapter to the router and plug the
power adapter into an outlet.
b. Wait for the Power LED on the front panel to light amber
and turn white.
If no LEDs are lit, press the Power On/Off button on the
rear panel of the router.
Modem
Cable or
DSL
Modem
Ethernet
cable
Ethernet
cable
5
Router
Router
Power
adapter