Mitsubishi FX1N-2AD-BD User Manual

This manual contains text, diagrams and explanations which will guide the reader in the correct
installation, safe use and operation of the FX
read and understood before attempting to install or use the unit. Further information can be found in the
associated manuals list below.
Specifications are subject to change without notice
Guidelines for the Safety of the User and Protection of the
FX -2AD-BD Analog Input Expansion Board.
1N
This manual has been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows:
a) Any engineer using the product associated with this manual, should be of a competent nature,
trained and qualified to the local and national standards. These engineers should be fully aware of
all aspects of safety with regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to
the local and national standards.
c) All operators of the completed equipment should be trained to use that product in a safe and
coordinated manner in compliance to established safety practices.
Note: The term 'completed equipment' refers to a third party constructed device which contains or uses
the product associated with this manual.
Note's on the Symbols Used in this Manual
At various times through out this manual certain symbols will be used to highlight points of information
which are intended to ensure the users personal safety and protect the integrity of equipment.
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property
damage.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage
that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understanding the
text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the
product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfy yourself as
to its suitability for your specific application.
Associated Manual
Manual Name
FX Series
1S
Programmable controllers
Hardware Manual
FX Series
1N
Programmable controllers
Hardware Manual
FX Series of
¤
Programmable controllers
Programming Manual ΙΙ
¤ Indispensable manual
FX -2AD-BD Analog Input Expansion Board
1N
-2AD-BD Analog Input Expansion Board and should be
1N
Manual
Number
Describes contents related to hardware of the
JY992D83901 FX
1S
and installation.
Describes contents related to hardware of the
JY992D89301 FX
1N
and installation.
Describes instructions in FX
JY992D88101
series.
User's Manual
JY992D96201A
Description
series PLC, such as specifications, wiring
series PLC, such as specifications, wiring
/FX /FX /FX
1S 1N 2N 2NC