Table of Contents
Advertisement
Chapter 1 Maintenance
4.2
Upon Using the DX2000 Utility Disc
[?]
Unable to start the DX2000 Utility Disc
Is DX2000 Utility Disc set?
Check that DX2000 Utility Disc is properly set.
4.3
Upon Installing an OS
[?]
Unable to install an OS
You cannot install an OS by using the server only. You need to access the server remotely by using a
management terminal. How to install the OS depends on the OS type. See the installation guide (Windows
version or Linux version).
[?]
SOL is not displayed on the OS installation screen.
Add the following option to the OS installation configuration file used for booting the server by using PXE.
console=ttyS2,115200n8
4.4
When OS Is Started
[?]
Unable to start OS
Are server modules installed firmly?
Install the modules properly.
Check that server modules on which OS is installed properly mounted.
Is the OS installed correctly?
Check that the OS has been installed by using the correct procedure.
[?]
When the OS is booted immediately after the installation of VMware, nothing is displayed on the
RemoteKVM environment and it is not possible to input from the keyboard.
To use VM Ware OS in the RemoteKVM environment, specify "ignoreHeadless=TRUE" as the option for the
OS startup command.
Set this option in an environment where SOL is activated.
20
Scalable Modular Server DX2000 Maintenance Guide
4. Troubleshooting
Advertisement
Table of Contents
