Disassembly Method; Main Body - JVC XL-R5020BK Service Manual

2.1 Main body

2.1.1 Removing the top cover (see Fig.1)
(1) Remove the four screws A attaching the top cover on both
sides of the body.
(2) Remove the two screws B attaching the top cover on the
back of the body.
(3) Remove the top cover from the body by lifting the rear part
of the top cover.
ATTENTION:
Do not break the front panel tab fitted to the top cover.
2.1.2 Removing the changer mechanism assembly
(see Fig.2~3)
*Prior to performing the following procedure, remove the top
cover.
(1) Remove the four screws C attaching the changer mecha-
nism assembly.
(2) Disconnect the card wire from connector CN606 and
CN651 on the CD servo control board respectively.
(3) Remove the changer mechanism assembly from the body
by lifting the rear part of the changer mechanism assem-
bly.
SECTION 2

Disassembly method

XL-R5020BK
Fig.1
Fig.2
Fig.3
7