How To Configure The Ifr 2968 Setup - Motorola MTP850 S Service Manual

TEST SETUP & TESTING 806-870MHz

How to Configure the IFR 2968 Setup

Perform the following steps to configure the IFR 2968 with the radio set:
1. Turn ON the IFR.
2. Press "Systems" Mode Key (wait until the digital system is initialized).
3. Press "Tetra Mobile" soft key.
4. Press "Setup" soft key and enter the System Parameters Screen.
5. Press "Channel Plan" soft key.
6. Press "More" soft key.
7. Press "Tetra 800MS" soft key. The "Control Channel" automatically changes
8. Press twice the "Traffic Channel" soft key and check that the marker goes to
9. Press "Country Code" soft key. Enter "234" and press again "Country Code"
10. Press "Network Code" soft key. Thereafter, enter "2392" and press "Network
11. Press "Base Color" soft key. Thereafter, enter "1" and press "Base Color" soft
12. Press "More" soft key.
13. Press "Location Area" soft key. Thereafter, enter "22" and press "Location
14. Press "More" soft key.
15. Press "Min Rx Level" soft key. Thereafter, enter "-110dBm" and press "Min Rx
16. Press "Max Tx Level" soft key. Thereafter, enter "30dBm" and press "Max Tx
17. Press "Access Parameter" soft key. Thereafter, enter "-53dBm" and press
18. Press "Base Service" soft key.
Note: You are entering base services setup.
MTP850 TETRA Handportable Terminal / Basic Service Manual
to "2040"; and "Traffic Channel" automatically changes to 2140.
Timeslot. Press Data key "3" followed by the "Traffic Channel" soft key, to
change to Timeslot "3".
soft key.
Code" soft key.
key.
Area" soft key.
Level" soft key.
Level" soft key.
"Access Parameter" soft key.
5.2 - 5