Installing the keyboard
1
Align the keyboard with the screw holders on the computer.
2
Tighten the M2.0x2.5 screws to secure the keyboard to the computer.
3
Connect the keyboard cable, touchpad cable, trackstick cable and back light(optional) to the connectors on the system board.
4
Install the:
a
keyboard trim
b
battery
c
base cover
5
Follow the procedure in
Installing the keyboard trim
1
Align the keyboard trim with the tabs on the computer and press it until it clicks into place
2
Follow the procedure in
22
Removing and installing components
After working inside your
system.
After working inside your
system.