Verifying The Ip Multicast Address Configuration For Cfs Over Ip; Default Settings For Cfs - Cisco Nexus 5600 Series Configuration Manual

Using Cisco Fabric Services
Procedure
Step 1
Step 2
Step 3

Verifying the IP Multicast Address Configuration for CFS over IP

The following example shows how to verify the IP multicast address configuration for CFS over IP:
switch# show cfs status
Fabric distribution Enabled
IP distribution Enabled mode ipv4
IPv4 multicast address : 10.1.10.100
IPv6 multicast address : ff13::e244:4754

Default Settings for CFS

The following table lists the default settings for CFS configurations.
Table 1: Default CFS Parameters
Parameters
CFS distribution on the switch
Database changes
Application distribution
Commit
CFS over IP
IPv4 multicast address
IPv6 multicast address
OL-31641-01
Command or Action
switch# configure
switch(config)# cfs ipv6
mcast-address ipv4-address
switch(config)# no cfs ipv6
mcast-address ipv4-address
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Verifying the IP Multicast Address Configuration for CFS over IP
Purpose
Enters configuration mode.
Configures the IPv6 multicast address for CFS distribution
over IPv6. The range of valid IPv6 addresses is ff15::/16
(ff15::0000:0000 through ff15::ffff:ffff) and ff18::/16
(ff18::0000:0000 through ff18::ffff:ffff).
(Optional)
Reverts to the default IPv6 multicast address for CFS
distribution over IPv6. The default IPv6 multicast address
for CFS over IP is ff15::efff:4653.
Default
Enabled
Implicitly enabled with the first configuration change
Differs based on application
Explicit configuration is required
Disabled
239.255.70.83
ff15::efff:4653
49