Feature Information For Ipv6 Access Control Lists - Cisco Catalyst 2960 series Configuration Manual

Technical Assistance
Description
The Cisco Support website provides extensive online
resources, including documentation and tools for
troubleshooting and resolving technical issues with
Cisco products and technologies.
To receive security and technical information about
your products, you can subscribe to various services,
such as the Product Alert Tool (accessed from Field
Notices), the Cisco Technical Services Newsletter,
and Really Simple Syndication (RSS) Feeds.
Access to most tools on the Cisco Support website
requires a Cisco.com user ID and password.

Feature Information for IPv6 Access Control Lists

The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 115: Feature Information for IPv6 Access Control Lists
Feature Name
IPv6 ACL Extensions for
Hop-by-Hop Filtering
Releases
15.1(1)SG
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Feature Information for IPv6 Access Control Lists
Link
http://www.cisco.com/support
Feature Information
Allows you to control IPv6 traffic
that might contain hop-by-hop
extension headers.
This feature was supported on
CAT3560C, CAT3560CX,
CAT3560X, CAT3750X,
CAT4500-X.
The following commands were
introduced or modified: deny
(IPv6), permit (IPv6).
1233