User Commands - Cisco TelePresence ISDN Link Reference Manual

Cisco TelePresence ISDN Link
Contents Introduction

User commands

By typing ? or help after connecting to the unit, the system will
list all supported root commands.
Bye
The bye command will close the command line interface.
Echo <on/off>
If echo is set to On the key inputs are displayed when entering
text in a command line interface.
If echo is set to Off no user input is displayed when entering
text in a command line interface.
The oher commands
The other user commands are described in the following
pages.
D14953.01 ISDN Link API Reference Guide IL1.0 June 2012.
© 2012 Cisco Systems, Inc. All rights reserved.
About the API About the API xConfiguration
?
- User Commands -
help xcommand
xpreferences xstatus
systemtools
OK
10
xCommand
xconfiguration xfeedback xgetxml
bye echo log
API Reference Guide
xStatus Contact us
www.cisco.com