Table of Contents
Advertisement
5 Operation
Figure 6 : Touch Control on Glass
Fan on/off (The device starts at 2nd speed
level as default). Timer function. Filter cleaning reset.
This button will turn down the fan level.
This button will turn up the fan level.
Press the lamp button to operate the cooker
lighting.
When this button is pressed and held for 3
seconds, smart lighting function will be activated,
and a dot icon will be lit on the screen. When the
motion sensor detects any motion while this function
is active, wall lighting will be on for 15 seconds. This
duration will restart each time a motion is detected
by the sensor. When this button is pressed and held
for 3 seconds while Smart Lighting function is active,
the function and the dot icon will turn off.
Operating the Timer Function
When you press this button for 2 seconds while
the appliance is on switch-off timer of 15 minutes is
started and number of that cycle starts to flash on
the screen. In timer function, lamp (if it is on) and
motor shall be automaticly turned off after the of 15
minutes. If the button is pressed for about 2 seconds
again, flashing stops and timer is cancelled.
Cleaning Periods of the Metal Filter:
The filters must be cleaned when "C" signal
appears on the digital screen or (depending on
usage) after every 2-3 weeks. When the filters are
cleaned and mounted in their places, press this
button for more than 5 seconds in order to delete
"C" signal (when the product is inactive). Letter "E"
will appear on the digital screen, and the product will
switch to normal operation.
Boost Ventilation Mode:
The model you have purchased has a boost mode
for energy efficiency.
When the product is switched to maximum speed
while it is operated, a 'b' symbol shall be displayed
on the screen. Boost symbol indicates that (boost
ventilation) mode is active on the model. Product
shall operate for 7 minutes in this mode and 'b'
symbol shall flash on the screen during this period.
After 7 minutes, product shall automatically switch
down one speed level and shall resume operation in
the lower speed level
Note: It is not possible to use timer feature in the
boost mode.
10
Advertisement
Table of Contents
