Vlan Forward-Delay - Dell S6100 Configuration Manual

To return to the default value, use the no vlan bridge-priority command.
Parameters
vlan vlan-range
bridge-priority value Enter the keywords bridge-priority then the bridge priority value in increments of
Defaults 32768
Command Modes CONFIGURATION (conf-pvst)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related Commands
•
•
•
•

vlan forward-delay

Set the amount of time the interface waits in the Listening state and the Learning state before transitioning to the Forwarding state.
Syntax vlan vlan-range forward-delay seconds
To return to the default setting, use the no vlan forward-delay command.
1252 Per-VLAN Spanning Tree Plus (PVST+)
Enter the keyword vlan then the VLAN numbers. The range is from 1 to 4094.
4096. The range is from 0 to 61440. The default is 32768.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
vlan forward-delay — changes the time interval before Dell Networking OS transitions to the Forwarding state.
vlan hello-time — change the time interval between BPDUs.
vlan max-age — changes the time interval before PVST+ refreshes.
show spanning-tree pvst — displays the PVST+ configuration.