Mount And Connect The User Interface Module - Motorola TK30 User Manual

• To play music from an auxiliary device, connect
cable connector L to the 3.5mm headphone jack on
the auxiliary music device.
• To play music from an iPod/iPhone, use the
second audio cable (supplied):
1 Connect cable connector O to the iPod/iPhone.
O
2 Connect cable connectors K and L on first audio
cable to connectors M and N on second audio
cable.
N
M
N
M
L
K
mount and connect the user interface
module
Use the User Interface Module (UIM) to operate your car
kit.
The UIM can be mounted in two different configurations:
• directly on a flat spot within easy reach of the driver
using the supplied mounting tape
• using the supplied mounting bracket.
Caution: Do not mount in a location that obstructs driver's
vision or interferes with operation of the vehicle.
direct to flat surface
To install the UIM directly on a flat service:
P
install the harness 7