Table of Contents
Advertisement
• Refrain from locating the microphone directly in the
path of heat/AC vents.
• Refrain from mounting the microphone on door
pillars or windows that can transmit exterior wind
noise to it.
• Do not attach microphone to the vehicle's visor.
2
Route the microphone cable down the side of the
windshield, through the dash, and to the vehicle
integration kit.
3
Connect the microphone to the vehicle integration kit
connector C (shown on page 4).
set install preferences
1
Turn off your vehicle's ignition.
2
Turn on your vehicle's ignition while pressing and
holding the Green button for at least 5 seconds.
Installer Menu
Note: See page 13 for location of buttons and knobs
on UIM.
3
Use the scroll knob to view and change settings.
Setting...
Language
set language displayed on the UIM.
Display
set the display orientation for left- or
Orientation
right-hand operation.
Line Out
set to ON when using the auxiliary
input to your vehicle entertainment
system for music.
Privacy Mute
set whether to unmute the vehicle
entertainment system when a call is
switched to privacy mode.
Install Test
test and verify:
• ignition source
• left-side speaker
• right-side speaker
• microphone
• auxiliary input to vehicle
entertainment system.
Factory
reset all settings back to standard
Reset
default factory settings
About
list car kit's software version
install the harness
11
Hide quick links:
Advertisement
Table of Contents
