Sony CMT-U1BT Operating Instructions Manual page 15

4
OTH
nd.
m
ot
music
be
.
nit.
and
e
the
vices
TH
of To cancel passcode entry partway
Press 
Notes
th
• "Passcode" may be called "Passkey, " "PIN code, " "PIN
A2DP,
. If
• Th is system only supports numerical passcodes up to
upport
rm
• Th e pairing standby status of the system is cancelled
e
• While connected to a BLUETOOTH device, this
CMT-U1BT.GB.2-683-494-61(1)
Enter the passcode.
Passcode entry may be required depending
on the type of BLUETOOTH device.
For details about the operations of
the BLUETOOTH device, refer to the
operation manual supplied with your
BLUETOOTH device.
Enter the passcode at the system as follows:
"PIN?" and a countdown appear.

Press / and /
the same passcode that was entered at
the BLUETOOTH device, and then press

ENTER .
Once pairing is completed and the
connection is established, the system
display changes as follows:
"Connect"  Name of the BLUETOOTH
device

.
number" or "Password, " etc. depending on the device.
13 digits.
aft er about 30 seconds. If pairing is not successful, redo
the procedure from step 1.
system cannot be detected and a connection cannot be
established from another BLUETOOTH device.
To erase all the pairing registration
information
Press BLUETOOTH 
1
When the system is connected with
a BLUETOOTH device (when the
BLUETOOTH device name appears in
the system display), turn off the system
or change the function to cancel the
connection.
2
Press CLEAR
"Delete?" appears.
3
Press ENTER
"Complete!" appears and all the pairing
information is erased.
Note
In order to connect with a BLUETOOTH device aft er
performing this operation, you must enter the passcode

again.
to enter

on the unit.

.

.

Continued
GB
15