Network Settings; Make New Connection Settings - ViewSonic airsync Display V210 Hardware Manual

Network Settings

Make New Connection Settings

Accessed by from Start on the Task Bar by selecting Settings, Control Panel,
then Network and Dial-up Connections. This panel allows you to add, name,
and configure five types of connection options to your airsync Display V210:
Make New Connection
• Dial-up Connection - through modem (not currently supported)
• Direct Connection - through cable
• Virtual Private Network (PPTP) - through host or IP address
• Virtual Private Network (L2TP) - through host or IP address
• Virtual Private Network (PPPoE) - through host or IP address
Each connection type has options for Security and TCP/IP settings accessed
by taping the Next button. The Dial-up and Direct connections have additional
options for the configuration of port settings and connection preferences.
My Connection
Dial-up Connection
Direct Connection
Virtual Private Connection (PPTP)
Virtual Private Connection (L2TP)
Virtual Private Connection (PPPoE)
ViewSonic airsync Display V210
OK X
Next
13