Table of Contents
Advertisement
Unpacking the Mobility Services Engine
Unpacking the Mobility Services Engine
Follow these steps to unpack the mobility services engine.
Step 1
Open the shipping container and carefully remove the contents.
Step 2
Return all packing materials to the shipping container and save it.
Step 3
Ensure that all items listed in the
Examine each item for damage. If any item is damaged or missing, notify your authorized Cisco sales
Step 4
representative.
Package Contents
Each mobility services engine package contains the following items:
•
•
•
•
•
A two-post installation kit is not offered for this product.
Note
Installation Precautions
Before you begin the installation, review the warnings and cautions in this section.
There are no user-serviceable parts inside the power supply; contact Cisco when servicing is required.
Caution
Caution
The operating temperature of the mobility services engine, when installed in an equipment rack, must
not go below 50°F (10°C) or rise above 95°F (30°C). Extreme fluctuations in temperature can cause a
variety of problems in your mobility services engine.
The equipment rack must provide sufficient airflow to the front of the mobility services engine to
Caution
maintain proper cooling.
Cisco 3310 Mobility Services Engine Getting Started Guide
4-2
One Cisco 3310 Mobility Services Engine
AC power cord
DB-9 serial cable for console connection with an RJ-45 to DB-9 adapter
This guide, the Cisco 3310 Mobility Services Engine Getting Started Guide
Four-post installation kit (optional)
"Package Contents"
section are included in the shipment.
Chapter 4
Rack Mounting
OL-17304-02
Advertisement
Table of Contents
