Installing A Child Seat Using Latch - Honda Element 2004 Owner's Manual

Main Menu
Installing a Child Seat Using
LATCH
ANCHOR COVER
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the rear
seats. The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
marked with a small button above
the point.
Table of Contents
WWW.MANUALS.WS
MARKS
To install a LATCH-compatible child
seat:
1. Remove both anchor covers by
pulling forward.
Make sure there are no objects
2.
near the anchors that could
prevent a secure connection
between the child seat and
WWW.MANUALS.WS
anchors.
Installing a Child Seat
Rigid type
3. Place the child seat on the vehicle
seat, and attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connection as
shown above.
Driver and Passenger Safety
CONTINUED
39