Replacing A Front Parking/Turn Signal Light Bulb - Honda Element 2004 Owner's Manual

Main Menu
2. Remove the electrical connector
from the bulb by pulling the
connector straight back.
3. Remove the rubber weather seal
by pulling on the tab.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.
Table of Contents
WWW.MANUALS.WS
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
6. Reinstall the rubber seal. Make
sure it is right side up; it is marked
''TOP.''
7. Push the electrical connector onto
the new bulb.
8. (Driver's side)
Install the front end of the air
intake duct.
WWW.MANUALS.WS
Replacing a Front Parking/Turn
Signal Light Bulb
1. The front parking/turn signal light
is next to the headlight bulb. On
the driver's side, remove the front
end of the air intake duct by
pulling it out.
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Maintenance
Lights
CONTINUED
167