Adjusting The Headlight Beam - Yamaha FZ 16 Assembly Manual

1
2
b
a
5. Adjust:
• Brake pedal free play
6. Align the rear axle
a. To maintain correct axle alignment. Reference lines "1"
on the swingarm should be matched with an outer
diameter of the washer "2"at both the sides.
b. After adjusting, be sure to tighten each chain adjusting
locknut. Then tighten the axle nut to the specified torque.
J. ADJUSTING HEADLIGHT BEAM
1. Loosen:
• Head light mounting bolt "1" from both the end.
• Head light beam adjustment bolt "2".
2. Adjust :
Loosen the headlight adjusting screw and move the
headlight in the following manner to adjust the headlight
beam.
3. Tighten Bolt 1 & 2
Direction "a"
Headlight beam is lowered.
Direction "b"
Headlight beam is raised.
4. Tighten the adjusting bolt "2" upto the specified torque.
34