Table of Contents
Advertisement
FRONT FENDER
2
1
3
4
FRONT WHEEL
1
5
6
2
1. Seat the Front fender assy. "1" between the Front fork
leg "2" .
2. Install the Screw cross recess "3" along with the collar
"4".
NOTICE
Be careful not to scratch to the front fender with the
front fork outer tube.
3. Install the hex bolt "5" along with the washer "6" from
the inner side of fender.
4. Tighten the screws and bolts as per the specification.
Screw
3.0 Nm, 0.3Kg.m, 2 ft.lb
Bolt
6.0 N.m, 0.6 Kg.m, 5 ft.lb
WARNING
Proper cable routing is essential to safe motorcycle
operation.
1
C
1
2
C
2
3
C
4
4
C
2
5
C
2
1. Install the speed sensor gear unit into the wheel hub so
that the projection "1" on the wheel hub fits in either slot of
the speed sensor gear unit.
2. Lift the wheel up between the fork legs.
TIP
Make sure that there is enough space between the brake
pads before inserting the brake disc and that the retainer
in the speedometer gear unit fits over the slot on the fork
leg.
10
Hide quick links:
Advertisement
Table of Contents
