End Of Program; Interrupting A Program; Changing The Current Program - AEG F45078I-M User Manual

USER INSTRUCTIONS
If you open the door while the appliance is working, you must close it and
start the program again by pressing start/pause (ref. 2 fi g. 2-02). The pro-
gram will resume from where it was interrupted.
If the temperature in the tray exceeds 50°C (122°F), the program will resu-
me after about 30 seconds.
2.2.3

End of program

The end of the program is signaled by a short beep. Additionally, the indicator
light of the "daily wash" and "extreme wash" programmes (marked "end") fl ashes.
2.2.4

Interrupting a program

To interrupt the current program:
• press the start/pause button (ref. 2 fi g. 2-02); the indicator light of the current
program remains on (confi rmation beep); at this point, start the cycle by pres-
sing start/pause (ref. 2 fi g. 2-02), or change or cancel the program.
2.2.5

Changing the current program

To change the current program:
• interrupt it (see para 2.2.4 "Interrupting a program");
• select a new program (see para 2.2.2 "Selecting and stating a program").
Rev 0.0
EN
11