Speed Dial Key Operation; To Originate A Call From Speed Dial Keys - NEC UNIVERGE DT700 User Manual

Figure 8.27 Exit softkey
5
Figure 8.28 Exit softkey

To originate a call from Speed Dial Keys

•
•
•
•
8-134
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
Do one of the following:
• To return to the main phone screen without making any changes to the entry, press
the Exit softkey or the Feature Key.
• To view the information for another Speed Dial key, press that Speed Dial key. If the
key is not programmed as a Speed Dial Key, you will be prompted to program the
Speed Dial Key.
S P E E D D I A L K E Y O P E R A T I O N
When you press a Speed Dial Key, the number configured for that Speed Dial Key is
dialed.
If you need to edit the number before dialing, you can use the Dial softkey to allow
edit the number before dialing if you have Edit Before Dialing Enabled on the phone.
This allows you to add a prefix to the number (such as an outside service or access
code) before dialing.
Using the handset
Lift the handset and press the desired Speed Dial Key.
Or
Press the Feature Key, then press the Speed Dial Key to view the Speed Dial details, then
lift the handset.
Using the speaker
Press the Speaker Key, then press desired Speed Dial Key.
Or
Press the Feature Key, then press the Speed Dial Key to view the Speed Dial details, then
press the Speaker Key.
DT700 Phone User Guide