Error Messages - Honeywell TRS-3300 Installation And Operating Instructions Manual

46
7.

Error messages

An error message appears as a text in the display and is accompanied by a long buzzing sound. If the
reader can recognize the identity card number, this will be shown above on the display:
Error: 0010
Message
AOB entry not allowed
AOB-Out time error
AOB-In time error
Clock-In and present
Clock-In time error
Clock-Out and absent
Clock-Out time error
Data base not initialized
Daily pattern not found
Weekly pattern not found
EEPROM fault
> system halted
Entry memory full !
Installation and Operating Instructions TRS 33xx
Meaning
The official business key is blocked for this identity card. An official
business authorization is not noted for this identity card.
The AOB-Out entry took place beyond the time span for "AOB enry
allowed" defined in the daily work or no time span was defined.
The AOB-In entry took place beyond the time span for "AOB enry
allowed" defined in the daily work pattern or no time span was
defined.
ENTERING and present. This message appears when two Clock-In
entries occur in a row without an Clock-Out entry occuring between
them. This message appears in ONLINE operation on remote station
terminals within the booking permission, otherwise, <Bkng. beyond
perm.> is displayed.
The Clock-In entry occured beyond the allowed period. (s. Clock-Out
time error)
EXITING and absent. Same as Clock-In and present, except that,
between two Clock-Out entries, the Clock-In entry was forgotten. This
message appears in ONLINE operation on remote station terminals
within the booking permission, otherwise, <Bkng. beyond perm.> is
displayed.
The Clock-Out entry took place beyond the time span for "Booking
allowed" defined in the daily work pattern.
No data can be stored in the terminal because the data base has not
yet been set-up in the terminal. This happens during the initial start-
up.
The terminal has not been loaded accordingly with data or has had no
connection to the computer for several days no connection to the
computer.
The EEPROM installed in the terminal is faulty and the terminal is no
longer ready for operation.
The memory in the terminal used for buffering the offline entries is full
because the master computer has not picked up data from the
terminal for too long a time.