Mounting / Installation; Initial Mounting - Honeywell TRS-3300 Installation And Operating Instructions Manual

10

3. Mounting / Installation

Caution!
Indication of use:
3.1

Initial Mounting

1. Stick the enclosed sealing (white foam material)
into the fitting notch of the back of the device
2. Remove screw cover and loosen the locking screw
with the enclosed Allen wrench with center hole.
4
Concerning IP-Class see also chapter 11 = Technical data.
Disconnect the power supply before opening the device (switch off circuit
breaker or fuse / remove the plug of the external power supply)!
The TRS 33xx time recording terminal is purely meant for recording
bookings. It is only suited for use with time recording software of the
facturer or OEM partners.
The device is purely planned and constructed for use in a secured area
within a bulding. The use in the open air does not correspond to the
environment conditions based on by the manufactorer.
Installation and Operating Instructions TRS 33xx
4
.