Wds Mode - D-Link DAP-1353 User Manual

Section 3 - Configuration
In WDS mode, the DAP-1353 wirelessly connects multiple
networks, without functioning as a wireless AP.
Wireless Band: 2.4GHz.
Mode:
WDS is selected from the pull-down menu.
Network Name
(SSID):
designated for a specific wireless local area
setting is dlink
to connect to an existing wireless network or to
SSID Visibility:
Enable or Disable
Auto Channel
Selection:
performance. This feature is not supported in

WDS mode.

Channel:
All devices on the network must share the same
channel. To change the channel, use the pull-down
menu to make the desired selection.
Channel Width:
Remote AP MAC
Address:
D-Link DAP-1353 User Manual
WDS mode
20 MHz or Auto 20/40 MHz.
20