Setting the clock
1
In standby mode, press and hold DISPLAY/
CLOCK on the remote control set for 2
seconds.
2
Press PROG on the remote control to select
12-hour or 24-hour display.
3
Press DISPLAY/CLOCK to confirm.
➜
The clock digits for the hours flash.
4
Press 4 / ¢ to set the hours.
5
Press DISPLAY/CLOCK again.
➜
The clock digits for the minutes flash.
6
Press 4 / ¢ to set the minutes.
7
Press DISPLAY/CLOCK to confirm the time.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD, TUNER or DAB is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
1
In standby mode, press and hold TIMER about
2 seconds on the remote control.
2
Press SOURCE (or DISC/TUNER/DAB on
the remote control) to select sound source.
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press 4 / ¢ to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press 4 / ¢ to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
Note:
– If CD source is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
Activating and deactivating
9
TIMER
●
In standby or during playback, press TIMER
once.
➜
Display shows
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●
During playback, press SLEEP on the remote
control once or more.
➜
Display shows
options in sequence: 60, 45, 30,15, 0, 60... if
you have selected a time.
●
To deactivate, during playback, press SLEEP on
the remote control once or more until " 0" is
shown, or press STANDBY ON 2 (or 2 on
the remote control).
➜
Clock/Timer
if activated, and disappears if
and one of the sleep time
disappears from the display.
19