Software/Features; Status Page; Figure 125 - Connectorized 600 Series Bridge Status Page - Motorola PTP 600 Series User Manual

13.3 Software/Features

This section only describes the areas where functionality is modified for the connectorized
variant. For details of the functionality that is common to the integrated and connectorized
variants, see Section 8 "Web Page Reference".

13.3.1 Status Page

The link loss calculation presented on the Status Page of the management interface has to be
modified to allow for the increased antenna gains at each end of the link. The manufacturing
process of the Connectorized 600 Series Bridge configures the standard hardware of the unit
for use with external antennas. The installer is prompted, as part of the installation process, to
enter the gain of the external antenna(s) and cable losses at each end of the link.
Peer-to-peer messaging is used to pass the effective antenna gain to each end of the link so
that the link loss calculations can be correctly computed.
Figure 133 - Connectorized 600 Series bridge Status Page
13 Connectorized PTP 600 Series Bridge
235