Camera; Installer Menu; Base Frame Rate; Camera Led - Bosch DINION IP 5000 MP Software Manual

38 en | Camera
7

Camera

7.1

Installer Menu

7.1.1

Base frame rate

Select the base frame rate for the camera.
Note:
Shutter times and frame rates, and the analog output (if
present) are affected by this value.
7.1.2

Camera LED

Disable the Camera LED on the camera to switch it off.
7.1.3

Mirror image

Select On to output a mirror image of the camera picture.
7.1.4

Flip image

Select On to output an upside down camera image.
7.1.5

Menu button

Select Disabled to prevent access to the install wizard via the
menu button on the camera itself.
7.1.6

Analog output

Select an aspect ratio format to activate the analog output of
the camera.
7.1.7

Reboot device

Click Reboot to restart the camera.
7.1.8

Factory defaults

Click Defaults to restore the factory defaults for the camera. A
confirmation screen appears. Allow several seconds for the
camera to optimize the picture after a reset.
2015.04 | v1.592 | AM18-Q0678
Camera Browser
Interface
Bosch Security Systems