Disassembly and Reassembly
3-3 Scanner Ass'y
1. Before you remove the Scanner Ass'y,
you should remove:
- Rear Cover (see page 3-1)
2. Remove the six screws and take out the Shield
Main Upper.
3. Remove the three screws, as shown below.
3-2
4. Open the Side Cover Ass'y first to open the
Front Cover, in the other words, close the Front
Cover first to assembly it.
5. Unplug the one connector from the Main Board
and remove two screws.
6. Pull up the Scanner Ass'y in the direction of
arrow.
Samsung Electronics