Honeywell CN75 Quick Start Manual page 14

Scan a Bar Code
Note: For optimum performance, avoid
reflections by scanning the bar
code at a slight angle.
1. Point the computer at the bar code.
2. Touch and hold the Scan button.
3. Center the aiming beam over the
bar code. When the scanner successfully reads the bar
code, the computer beeps, and the Good Read LED briefly
turns on. The bar code information is entered into the
application in use.
4. Release the Scan button.
Sync Data
To sync files between your CN75/CN75e and computer:
1. If you have a computer running Windows® 10, open the
Phone Companion app from Start > All apps.
If your have a computer running Windows 8 or Windows 8.1,
the Windows Phone® app automatically opens when you
connect the CN75/CN75e NI to the computer using a USB
charge/communication cable.
If you have a computer running Windows 7 or Mac, go to
www.windowsphone.com
Windows Phone app for desktop or Mac.
to download and install the
13