Displaying Static VSAN Configuration
Command or Action
Step 4
switch(config-vsan-db)# vsan vsan-id
loadbalancing src-dst-id
Step 5
switch(config-vsan-db)# no vsan vsan-id
loadbalancing src-dst-id
Step 6
switch(config-vsan-db)# vsan vsan-id
loadbalancing src-dst-ox-id
Step 7
switch(config-vsan-db)# vsan vsan-id suspend
Step 8
switch(config-vsan-db)# no vsan vsan-id suspend
Step 9
switch(config-vsan-db)# end
About Interop Mode
Interoperability enables the products of multiple vendors to connect with each other. Fibre Channel standards
guide vendors to create common external Fibre Channel interfaces.
Displaying Static VSAN Configuration
The following example shows how to display information about a specific VSAN:
switch# show vsan 100
The following example shows how to display VSAN usage:
switch# show vsan usage
4 vsan configured
configured vsans:1-4
vsans available for configuration:5-4093
The following example shows how to display all VSANs:
switch# show vsan
Default VSAN Settings
The following table lists the default settings for all configured VSANs.
Table 18: Default VSAN Parameters
Parameters
Default VSAN
State
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
100
Purpose
Enables the load-balancing guarantee for the selected VSAN
and directs the switch to use the source and destination ID
for its path selection process.
Negates the command entered in the previous step and reverts
to the default values of the load-balancing parameters.
Changes the path selection setting to use the source ID, the
destination ID, and the OX ID (default).
Suspends the selected VSAN.
Negates the suspend command entered in the previous step.
Returns you to EXEC mode.
Default
VSAN 1.
Active state.
Configuring and Managing VSANs
OL-xxxxx-xx