Miele PW 6101 Programming Instructions Manual page 44

Manual control
Dispensing ß
The dispensing valve and the amount to
dispense can be set.
^ Press the "Dispensing" ß button.
Manual control ~ Dispensing
Dispenser pump: D1
Dispensing amount: 100 ml
^ Press the rotary dial to confirm "Dispenser
pump".
Manual control ~ Dispensing
Dispenser pump: D1
Dispensing amount: 100 ml
^ Turn the rotary dial to find the dispenser
pump you want and then press it to
confirm your selection.
Manual control ~ Dispensing
Dispenser pump:
Dispensing amount: 100 ml
^ Turn the rotary dial to "Dispensing amount"
and then press it to confirm your selection.
^ Turn the rotary dial to find the amount you
want and then press it to confirm your
selection.
^ After selecting the dispenser pump and
the dispensing amount pressing the "Start"
h button will start the dispensing process.
^ Dispensing stops once the agent has been
dispensed or when the dispensing ß
button is pressed.
44
A
A
D1
Washing and heating XY
The temperature, rpm and wash rhythm can
be set.
^ Press the XY button for washing and
heating.
Manual control ~ Washing and heating
Temp: 95 °C
rpm: Normal
^ Set the temperature followed by the rpm
and then the wash rhythm.
^ Then press the h "Start" button to start the
washing and heating process.
^ The Washing and heating process will
finish when ready or when the XY
button is pressed again.
Drain with agitation XZ
The drain path, level, rpm and wash rhythm
can be set.
A
^ Press the XZ "Drain with agitation"
button.
Manual control ~ Drain with agitation
Drainage path: Drain
Level: 0 mm
^ Set the drainage path followed by the
level, then the rpm and the rhythm.
^ Then press the h "Start" button to start the
"Drain with agitation" process.
^ The "Drain with agitation" process with
finish when it is ready or when the
XZ button is pressed again.
e
A
e
A
M.-Nr. 06 533 430