Copy Area - Miele PW 6101 Programming Instructions Manual

Copy area

This option is used to copy an area from an
existing programme into another
programme. This adds a new area to an
existing programme, or overwrites an
existing area in that programme.
^ After selecting this option the following will
show in the display:
Copy ~ Area
Source programme: 1 Cottons
Source area: 1 Pre-wash
^ Press the rotary dial, select a source
programme number and then confirm your
selection.
^ Then go to the source area, and select
pre-wash, main wash or rinses and confirm
your selection.
Copy ~ Area
Target programme: 23 Sleeping bags
Target area: 3 Rinses
^ Select and confirm your target programme
and then select and confirm the target
programme number.
^ Then select and confirm the target area,
and select pre-wash, main wash or rinses
and confirm your selection.
If a target area is not available (a name not
yet defined for it) the area number and the
standard name for the area will appear
(target area: pre-wash, main wash, rinses)
^ After entering your selection and pressing
the S button the copying procedure will be
carried out.
M.-Nr. 06 533 430
If an existing area is to be copied to a target
programme position the following security
message will appear in the display:
Copy ~ Area
Overwrite existing data?
^ After pressing the S button the overwriting
procedure will be carried out and you will
be taken back to the "Copy" sub menu. If
e
you press the A button or, if you do not
S A
touch any buttons in the next 30 seconds
the copying procedure will not be carried
out and you will be taken back to the
"Copy" sub menu.
-
e
S A
Programming
e
S A
11