Table of Contents
Advertisement
AG-520VDH
5.1.2.
USAGE SCREEN MODE
This function is displayed on the TV monitor:
· the total AC plugged in AC socket (in days)
· the total elapsed "Cylinder rotation" time (in hours)
· the total elapsed "DVD play" time (in hours).
1. With power turned and no cassette, press STOP/EJECT
button on VCR and 7 key on remote together.
The USAGE SCREEN will be displayed on the TV Monitor.
Note:
1. After replacing the Cylinder Unit, press COUNTER RESET
button on remote in this mode. Only Total elapsed "Cylinder
rotation" time (in days) will be cleared to 0.
2. After replacing the DVD Unit, press ADD/DLT button on
remote in this mode. Only Total elapsed time "DVD Play"
time (in hours) will be cleared to 0.
3. To release from Usage Screen Mode, press any operation
button on VCR or insert a cassette tape in this mode. VCR
will return to normal operation mode.
Fig. 2
5.1.3.
GROUNDING FOR
ELECTROSTATIC BREAKDOWN
Prevention
1. Human body grounding
Use the antistatic wrist strap to discharge the static
electricity from your body.
2. Work table grounding
Put a conductive material (sheet) or steel sheet on the area
where the optical pickup is placed and ground the sheet.
Caution:
The static electricity of your clothes will not be grounded
through the wrist strap. So take care not to let your clothes
touch the optical pickup.
5.1.4.
METHOD FOR EJECTING THE DVD
TRAY MANUALLY
1. Insert a Screwdriver or similar object into the Eject hole.
2. Press it gently, and then pull the Tray fully out.
10
Fig. 3
Fig. 4
Advertisement
Table of Contents
