Troubleshooting - Electrolux mobione ZMO1520 Operating Instructions Manual

TROUBLESHOOTING

You can perform your own troubleshooting at home based on the checklist given below.
However, if the problem persists, please consult your nearest authorized Electrolux
Service Centre.
PROBLEM
The vacuum cleaner
does not start.
Filter indicator lights
and stays on.
Reduction of
suction capacity.
Over heating.
To locate your nearest Electrolux Service Centre, please contact your country's Electrolux
Customer Care found on the last page of this booklet.
POSSIBLE CAUSES
The plug is not properly
connected to the socket.
Thermal protector
activated due to
the motor to cool off.
Dust container is full.
The filters are clogged.
Suction hose is blocked.
Nozzle is blocked.
Dust container is full.
Filters are clogged.
Hose is damaged
or broken.
Dust container is full.
Filters are clogged.
CORRECTIONS
Check the plug connection
or try another socket.
Press the ON/OFF button
and wait 20 - 30 minutes for
high temperature.
Empty the dust container.
Clean or replace filters.
Clean the hose.
Clean the nozzle.
Empty/replace the dust
container.
Clean or replace filters.
Change the hose.
Empty/replace the dust
container.
Clean/replace filters.
9