Before Starting; Assembling The Vacuum Cleaner - Electrolux mobione ZMO1520 Operating Instructions Manual

• Never pull or lift the vacuum cleaner
by the cable. Keep the electrical
cord away from heat, oil, sharp
edges and rough or hot surfaces.
• Ensure that the dust container and
the filters are in place before use.
To prevent any reduction in air flow,
ensure that all vents in this appliance
are kept free from blockage. Do not
insert any objects into these vents.
• Please take extra care when
vacuuming staircases.
• A practical parking slot makes
things easier when pausing during
cleaning and minimize minimize the
risk of breakage. The parking slot
makes it easier to move and store
the vacuum cleaner in an upright or
horizontal position.
Modifications & Repair
• It is dangerous to make modifications
to the appliance. Use only
accessories recommended
by Electrolux.
• The vacuum cleaner should only
be repaired and/or serviced by an
authorized Electrolux Service Centre.
Genuine Electrolux spare parts
should be used at all times. Under no
circumstances should the customer
attempt to repair the vacuum cleaner.
Failure to comply with this may
render the warranty void.
Important!
This vacuum cleaner must only be
connected to a power supply whose
voltage and frequency comply with
the specifications given on the
appliance rating plate.
4
Quick Guide

BEFORE STARTING

• On first removing the product from its
packaging, check for any damages.
• Check that the dust container and
the filters are in place. Never operate
the cleaner without the dust
container installed.
• Always remove the plug from the
power supply before fitting or
removing any accessories.
ASSEMBLING THE
VACUUM CLEANER
Fitting or removing the flexible hose
• Insert the hose until the catch
clicks to engage (press the catch to
release the hose.)
Fitting extension tubes and
accessories