Imaging Acceleration Board Rom (Ge-1170) - Toshiba e-STUDIO2020C Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2020C:

Table of Contents

Imaging Acceleration Board ROM (GE-1170)

The file system of USB media should be formatted in the FAT or FAT32 format. Be careful

since the devices formatted in NTFS format will not be able to be operated. The file system

can be confirmed on the properties in applications such as Explorer of Windows.

The firmware version of the Imaging Acceleration Board ROM differs depending on the

version of the system firmware.

Therefore confirm in advance that the version is the correct one before updating the Imaging

Acceleration Board ROM.

[A] Update procedure

Connect the USB media to the PC and write the model specific folder in which the data file is

Store the update program loader (mentusb2.o) in the root directory, and store the model specific

update program (dlFirmWare_2820C_3530C) and the data file for updating in the model specific

Press the [ON/OFF] button on the control panel to shut down the equipment.

Connect the USB media to the USB port on the right upper cover.

Updating cannot be performed with multiple USB media connected at the same time.

e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C

FIRMWARE UPDATING