Table of Contents
Advertisement
g [AUDIO] (Audio on/off)
Use this to record audio.
On (green): Audio is recorded.
Off (gray): Audio recording is stopped.
h Status button
Displays the "[Status] Screen" (page 77).
i [Recording List] button
Displays the [Recording List] screen.
j HDD capacity / error indicator
Displays the internal HDD's remaining capacity
under normal conditions.
If an error occurs, the error that appears on the front
panel display also appears here.
k 1 (on/standby) button
Use this to set the unit to standby mode.
A confirmation message when you tap this.
l Control buttons
Use these to control playback and recording.
The buttons function identically to the buttons on the
front panel of the unit and on the infrared remote
control unit.
For details, see "Names and Functions of Parts"
(page 18).
Tips
• Ch1 playback cannot be performed during Ch2
recording or playback.
• Ch2 recording or playback cannot be performed
during Ch1 playback.
m Ch1 image display and playback/recording status
Displays the input image or playback image for Ch 1
and various playback/recording status indicators.
Playback/recording counter: Displays the
playback or recording time in "0:00:00" format.
Still capture count: Displays the number of still
images you captured in "CAP:001" format.
Rec mode: Displays the current recording mode.
External media recording status: Displays the
recording status for each external media in
"x <media name> -h -m" format.
Printer status: Displays the print status and the
remaining number of print sheets.
Indicators: The indicators light according to the
status of the corresponding media or printer.
(gray): Operating normally.
(green): Data is being written or printing is in
progress.
(orange): An error has occurred.
n [Input]
This is enabled when [2D/3D] is set to [Manual] in
the [System Admin Settings] screen – [Function
Settings] screen – [Input Detection] tab. When [Auto]
is selected, the input signal is automatically
recognized and displayed here.
This configures the Ch1 input signal.
[Ch1 Ext Storage]
Configures the external storage destination for Ch1
recorded data.
[Status] Screen
The [Status] screen displays the status of recording to
external media, the conditions of connected devices, and
other status information.
a [User Settings]
Displays the [User Settings] screen.
For details, see "Displaying the [User Settings]
Screen" (page 31).
b [System Admin Settings]
Displays the [System Admin Settings] screen.
For details, see "Displaying the [System Admin
Settings] Screen" (page 56).
Video Playback Screen
This screen appears during video playback.
You can control playback using the buttons at the bottom.
Chapter forward/back buttons
77
Advertisement
Table of Contents
